Yahan Hamiter
Norwood Borough, Delaware County, PA
Electrician in Norwood, PA
Free estimates, no trip fee, and a call back in about 5 minutes. A.V. Electric is a short drive away in Collingdale and open 7 days a week.
Why Us
Why Norwood Homeowners Call Us First
A Call Back in 5 Minutes
Reach out and Anthony calls you back in about 5 minutes during open hours. No phone tag, no waiting days for an answer.
Free Estimates, $0 Trip Fee
You never pay just to get a price. Anthony looks at the job, gives you an honest number, and you decide from there.
Permits Pulled on Every Job
A.V. Electric partners with a licensed Electrical Contractor, so your work is done to code, permitted, and passes inspection. That protects your home and your insurance.
Satisfaction Guaranteed
If you're not happy with the work, Anthony makes it right. Sixteen years of repeat customers in Delco came from showing up on time and treating homes with respect.
Your Norwood Electrician, Close to Home
A lot of people in Norwood have lived in the same house for years, and when something goes wrong inside the walls, they want a straight answer from someone who actually shows up. That's the idea behind A.V. Electric. We're a locally owned, family owned electrician based in Collingdale, and Norwood is a short drive from our shop.
Anthony "Woody" Wood has 16 years of electrical experience in Delaware County. When you call, Woody calls you back in about 5 minutes during open hours. He looks at the work, gives you an honest price, and doesn't charge a trip fee for the estimate. Then the same person who quoted the job does it. A.V. Electric partners with a licensed Electrical Contractor, so permits get pulled and the work passes inspection. We're open 8am to 5pm, seven days a week.
From the houses along Chester Pike to the streets off Winona Avenue and Welcome Avenue, we cover all of Norwood. For a look at every town we work in, see our Delaware County service areas page.
Our Services
Electrical Services for Norwood Homes
A lot of calls from Norwood start with a simple question. Why does this breaker keep tripping? Why is half of the kitchen dead? Can my panel handle a new AC or a car charger? Here's what we do, and each card goes to the full page if you want more detail.
Generator Installation
When PECO goes down in a summer storm or a nor'easter, a standby generator keeps your heat, fridge, and lights running on their own. Sizing, fuel lines, the transfer switch, and permits all have to be handled right, and that's exactly what we do. Anthony walks you through the options that fit your home and budget before any work starts. Most installs finish in a day or two, with a free estimate up front.
Learn more
Electric Panel Upgrade
Many homes around Collingdale still run on 60 to 100 amp panels or old fuse boxes that were never built for today's appliances, AC, and EV chargers. Warm breakers, flickering lights, and constant trips are signs your panel is maxed out. We replace old panels with modern 200 amp service, done to code with permits pulled. Most panel swaps take one day, and your power is back on that evening.
Learn more
House Rewiring
A lot of Delco's pre-1930s rowhomes still have knob and tube or aluminum wiring behind the walls. Insurance companies flag it, and it's a real fire risk. Anthony has rewired these exact homes for 16 years and knows how to do it with as little wall damage as possible, room by room if needed. Start with a free wiring inspection so you know what you have and what it costs to fix.
Learn more
General Electrician Services
Not every job is a big project. Dead outlets, crackling switches, ceiling fans, new light fixtures, and outdoor lighting are the everyday calls that keep a house working, and plenty of electricians won't bother with them. We treat the small stuff with the same care as a panel swap: a call back in about 5 minutes, no trip fee, and the price approved before work starts. Most jobs are done in one visit, because the truck already carries the parts.
Learn moreElectric vehicle charging station contractor
Charging your EV from a regular outlet is slow, and many Delco panels can't handle a charger without an upgrade. A.V. Electric installs Level 2 chargers for Tesla and every other EV brand, plus the dedicated circuit to power them safely. One visit covers the estimate, the panel check, and the plan, whether you're in Collingdale or King of Prussia.
Learn moreSecurity system installation service
Package theft and break-ins are real worries on Delco's tight rowhome blocks. A.V. Electric installs video doorbells, wired and wireless cameras, and full NVR systems so you can watch your porch, your car, and your back alley from your phone. Clean installs with hidden wiring, set up and working before we leave.
Learn moreWhat's Behind the Walls in Norwood Homes
Norwood is a small, built out borough. It covers about 0.81 square miles and had 5,943 residents at the 2020 census. We pulled the Census Bureau's survey numbers for the borough (2020 to 2024 estimates), and they show a town with a lot of postwar homes and a long tail of older ones.
The median Norwood home was built in 1951. About 33 percent of the housing dates to 1939 or earlier, another 15 percent to the 1940s, and 20 percent to the 1950s. That puts roughly two out of three homes before 1960. The 1960s add another 17 percent, so by 1970 about 84 percent of Norwood's housing was already standing. Only about 10 percent has been built since 1990.
Home styles are a nearly even mix. About 39 percent of homes are attached, like rows and twins, and about 35 percent are detached single family houses. Another 26 percent are in buildings with two or more units, including a good number of small apartment buildings. Roughly three out of four households own their home, which fits the feel of the town. People here live in their houses for a long time, and they remember what the previous owner did to the wiring.
Norwood also has some real age. The Morton Morton House on East Winona Avenue dates to around 1750, and the borough sits where Muckinipattis Creek meets Darby Creek. Between the older streets and the mid century blocks, there's a lot of variety, and that's exactly why we look at each house on its own instead of assuming.
Common Electrical Problems in Norwood Homes
Here's the honest version. Nobody publishes an electrical problem list by borough, so this comes from the age and style of Norwood's housing and 16 years of working in Delco homes. Your house may have none of these. These are the first places we look.
Panels from the 1950s and 1960s
With about two thirds of Norwood homes built before 1960 and many more from the 1960s, plenty of houses still have 100 amp panels that were fine when the house had one TV. Add central air, a dryer, a dishwasher, and a home office and the panel is working harder than it was designed to. Breakers that trip, flickering lights, and a warm panel door are the warning signs. An electric panel upgrade to 200 amp service handles it, and most panel swaps are done in a day.
Fuse boxes and old brand name panels
The oldest Norwood homes can still have screw in fuses. A fuse box replacement takes care of that. In homes where the panel was upgraded between the 1950s and 1980s, brands like Federal Pacific and Zinsco are possible, and those are known for breakers that don't always trip. If that's your panel, an electric panel replacement is the safe move. If one breaker is simply worn out, circuit breaker replacement costs a lot less, and Woody will tell you honestly which one you need.
Old wiring in the older streets
About a third of the borough's housing dates to 1939 or earlier. Homes that old can have cloth wrapped wire, ungrounded two prong outlets, and sometimes knob and tube wiring. For those houses, house rewiring is the long term fix, and we can do it a room at a time to keep the disruption down. If you need everything redone, a whole house rewire is available.
Aluminum wiring in some later homes
Aluminum branch wiring was used in some homes built in the late 1960s and early 1970s. It isn't in every house from that period, but with about a fifth of Norwood's homes built between 1960 and 1979 it's worth knowing about. Switches and outlets on aluminum circuits can run hot or loosen over time. If you've noticed warm cover plates or flickering on a few circuits, give us a call.
Small stuff that adds up
A dead outlet, a switch that crackles, a ceiling fan that wobbles, or a bathroom with no GFCI protection is more than an annoyance. Our outlet and switch repair and our general electrician services cover the everyday stuff, and most of it gets done in a single visit because the truck already carries the parts.
Basements near the creeks
Norwood sits where Muckinipattis Creek meets Darby Creek. If water has ever come into your basement, have the panel, outlets, and anything plugged in checked before you rely on them. Never switch a panel back on if it got wet. Call us and we'll take a look first.
What a Panel Upgrade Looks Like in a Norwood Home
Norwood splits fairly evenly between rows and twins on one side and detached houses on the other, so no two panel jobs look exactly alike. Here's the general path. You call and Woody calls you back in about 5 minutes. He comes out for a free estimate with no trip fee, checks the size of the service, looks at what feeds the house and the panel itself, and gives you a price you approve before any work starts.
In a detached house the panel is often in the basement or a utility area with room to work, and a swap moves quickly. In an older house or a twin, the job may take more planning around finished walls or a tight corner. Either way, the old panel comes out, a modern 200 amp panel goes in, the permit is pulled, and the work is inspected. Most swaps finish in one day, and the lights are back on that evening.
If you're adding central air or a car charger, we size the new panel for what you plan to add, not only for what you have today. That way you're not calling us back in two years for the same job.
Permits, Inspections, and Selling a Norwood Home
Norwood's borough code puts a Building Official in charge of permits and inspections, and permits cover service equipment like panels. The borough also requires a Certificate of Occupancy when a property is sold or rented, and the inspector checks that the property meets electrical, fire, and building requirements.
A.V. Electric partners with a licensed Electrical Contractor and pulls permits on every job. Your work is done to code, it's permitted, and it passes inspection. That protects your home and your insurance.
If you're selling, a free estimate before you list can save a lot of stress. Old panels, ungrounded outlets, and fuse boxes tend to show up on a buyer's inspection report. Fixing them first is often cheaper and a lot calmer than negotiating repair credits. If you're buying a Norwood home and the inspection came back with an electrical list, send it our way. We'll explain what actually needs attention and give you a price up front.
Making a Norwood House Work for Today
Most Norwood houses can handle modern life with the right upgrades.
Thinking about an electric car? A home charger needs its own circuit and a panel that can carry it. Our EV charger installation covers the circuit, the permit, and the install, and our EV charging station installation page explains the process.
Tired of losing power every time PECO has an outage? A standby generator keeps the heat and fridge on. See generator installation for the details, or call about generator repair if yours won't start.
Want to see who's at the door or keep an eye on the driveway? We handle home security camera installation and keep the wiring clean. More options are on our security system installation page.
About Norwood, PA
Norwood is a Delaware County borough with a small town feel and quick access to the rest of the region. Chester Pike, which carries U.S. Route 13, runs through the middle of town, and Winona Avenue, Welcome Avenue, and Amosland Road are some of the other main streets. Norwood Station on Welcome Avenue sits on SEPTA's Wilmington/Newark regional rail line. The borough is part of the Interboro School District, which also serves Glenolden, Prospect Park, and Tinicum.
The Norwood Public Library on Welcome Avenue was founded in 1925, and its current building went up in 1951. Norwood Lower Park off East Amosland Road has ball fields, a playground, and courts. It's a small town with a lot of people who've stayed put, and we like working in towns like that.
Serving Norwood and the Towns Around It
Woody works around the neighborhood every week, so a Norwood call is never a long trip. If you're in Prospect Park, Darby, or Clifton Heights, we have pages for those towns too. We also cover Glenolden, Ridley Park, Folcroft, and everywhere else on our service areas page. Same free estimate, same quick call back, same electrician from start to finish.
Services We Offer in Norwood
Find what matches your problem, or call and we'll work it out together.
- Generator Installation
- Generator Repair
- Electric Panel Upgrade
- Electric Panel Installation
- Electric Panel Replacement
- Electric Subpanel Installation
- Circuit Breaker Replacement
- Fuse Box Replacement
- House Rewiring
- Whole House Rewiring
- General Electrician Services
- Outlet & Switch Repair
- Electric vehicle charging station contractor
- EV Charging Station Installation
- Security system installation service
- Home Security Camera Installation
Testimonials
See What Our Customers Say
Michael Lee
Paris world
Lincoln W Daniel
Nikki
Ruben Agosto
Aaquil Wright
Donte Shaw
Sherina Gabriel
Donte Shaw
Steven Sealy Sr
Dinita Shaw
Nicole White
Fitzroy Whittick
Trevon Whittick
SAL
Raymon Joel
Sparks 9804
Don Thomas
Herbert Graham
Andrew Proctor
David Pusey
Javid Wood
Ty H
Alexis Patterson
Adolphus
Aquanation INC
Lissann Adams
Leisa Wood
Mason Burk
Wanda Blackwell
charles Payne III
Dom
Candis Ambrose
Lenard Harris
Things To Do in Norwood, PA
Norwood sits in one of the oldest parts of the county, and some of the best stops are close by. Here are six places in and around the borough, from a house built around 1750 to a park where the Swedes settled in the 1640s.
FAQ
Frequently Asked Questions
How much does an electrician cost in Norwood?
It depends on the job. A dead outlet costs far less than a panel swap or a rewire. Every job starts with a free estimate and there's no trip fee, so you'll know the price before any work starts.
Does my Norwood home need a permit for electrical work?
In most cases, yes. Norwood's borough code has a Building Official who issues permits and inspects, and permits cover service equipment. A.V. Electric partners with a licensed Electrical Contractor and pulls permits on every job.
Do I need a Certificate of Occupancy to sell or rent in Norwood?
Yes. The borough requires one when a property is sold or rented, and the inspection includes electrical. An old panel or ungrounded outlets can slow things down, so a free estimate before you list is a smart move.
My Norwood house was built in the 1960s. Could it have aluminum wiring?
It's possible. Some homes from the late 1960s and early 1970s were wired with aluminum, though many weren't. If you see warm cover plates or flickering on a few circuits, call for a free estimate and we'll check.
How fast can you get to Norwood?
We're based in Collingdale, a short drive away. Call (267) 692-2184 and you'll hear back in about 5 minutes during open hours, 8am to 5pm, seven days a week. We can often get there the same or the next day.
Can you work on a small Norwood apartment building?
Yes. About a quarter of Norwood's housing sits in buildings with two or more units. Subpanels, panel replacements, and rewiring are all things we do. Call for a free estimate.
Get Started
Get Your Free Estimate in Norwood
Tell us what's going on with the electrical in your Norwood home. No pressure, no trip fee, and you'll know the price before any work starts.
Prefer to talk it through? Call Anthony directly.